EasyManua.ls Logo

IBM Flex System p260 - Page 151

IBM Flex System p260
524 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
A7004730
Explanation: Informational system log entry only.
Response: No corrective action is required.
A7004740
Explanation: Informational system log entry only.
Response: No corrective action is required.
A7004741
Explanation: Informational system log entry only.
Response: No corrective action is required.
A700474A
Explanation: System has Active Memory Mirroring (AMM) ON, but is not licensed for AMM use
Response: The management interfaces have been used to set AMM to "ON" for the system. However, at IPL time,
the system does not have a valid license for AMM. The customer needs to contact IBM or a Partner Sales
representative to purchase and enter an Activation Code for this feature. If this is not possible, then turn off the
system; use the management interfaces to turn AMM "OFF"; and re-IPL.
A7004788
Explanation: Informational system log entry only.
Response: No corrective action is required.
A70047FF
Explanation: Informational system log entry only.
Response: No corrective action is required.
A700YYYY
Explanation: For any other A7xxyyyy SRC not listed here, see the description for the B7xxyyyy error code with the
same xxyyyy value.
Response: Perform the action in the B7xxyyyy error code with the same xxyyyy value.
A7013003
Explanation: Partition-initiated PHYP-content RSCDUMP.
Response: No corrective action is required.
A7004730 A7013003
Chapter 8. Troubleshooting 139

Table of Contents

Related product manuals