IBM Flex System p260 - Page 169

B200514A
Explanation: A Firmware Assisted Dump did not complete due to a copy error.
Response: Check for server firmware updates; then, install the updates if available.
B200542A
Explanation: A Firmware Assisted Dump did not complete due to a read error.
Response: Check for server firmware updates; then, install the updates if available.
B200542B
Explanation: A Firmware Assisted Dump did not complete due to a copy error.
Response: Check for server firmware updates; then, install the updates if available.
B200543A
Explanation: A Firmware Assisted Dump did not complete due to a copy error.
Response: Check for server firmware updates; then, install the updates if available.
B200543B
Explanation: A Firmware Assisted Dump did not complete due to a copy error.
Response: Check for server firmware updates; then, install the updates if available.
B200543C
Explanation: Informational system log entry only.
Response: No corrective action is required.
B200543D
Explanation: A Firmware Assisted Dump did not complete due to a copy error.
Response: Check for server firmware updates; then, install the updates if available.
B2006003
Explanation: Firmware for the specified function cannot be loaded.
The firmware resource and all associated virtual and/or physical devices will not be available until the issue is
resolved.
Response: Collect a platform dump and then go to Isolating firmware problems.
B200514A • B2006003
Chapter 8. Troubleshooting 157