EasyManuals Logo

IBM Flex System p260 User Manual

IBM Flex System p260
524 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #183 background imageLoading...
Page #183 background image
B7000441
Explanation: Service processor failure. The platform encountered an error early in the startup or termination
process.
Response: Replace the system-board and chassis assembly, as described in Replacing the system-board and chassis
assembly.
B7000443
Explanation: Service processor failure.
Response: Replace the system-board and chassis assembly, as described in Replacing the system-board and chassis
assembly.
B7000601
Explanation: Informational system log entry only.
Response: No corrective action is required.
Note: This code and associated data can be used to determine why the time of day for a partition was lost.
B7000602
Explanation: System firmware detected an error condition.
Response:
1. Collect the event log information.
2. Go to Isolating firmware problems.
B7000611
Explanation: There is a problem with the system hardware clock; the clock time is invalid.
Response: Use the operating system to set the system clock.
B7000621
Explanation: Informational system log entry only.
Response: No corrective action is required.
B7000641
Explanation: System firmware detected an error.
Response:
1. Collect the platform dump information.
2. Go to Isolating firmware problems.
B7000441 • B7000641
Chapter 8. Troubleshooting 171

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the IBM Flex System p260 and is the answer not in the manual?

IBM Flex System p260 Specifications

General IconGeneral
BrandIBM
ModelFlex System p260
CategoryServer
LanguageEnglish

Related product manuals