BA040035
Explanation: The firmware was unable to find the plant of manufacture in the VPD. This may cause problems with
the licensing of the AIX operating system.
Response: Verify that the machine type, model, and serial number are correct for this server. If this is a new server,
check for server firmware updates; install the updates if available.
BA040040
Explanation: Setting the machine type, model, and serial number failed.
Response:
1. Reboot the server.
2. Search RETAIN tips and the firmware change history for the reference code to determine the recommended
actions. If a firmware update is needed, see Updating the firmware
BA040050
Explanation: The h-call to switch off the boot watchdog timer failed.
Response:
1. Reboot the server.
2. Search RETAIN tips and the firmware change history for the reference code to determine the recommended
actions. If a firmware update is needed, see Updating the firmware
BA040060
Explanation: Setting the firmware boot side for the next boot failed.
Response:
1. Reboot the server.
2. Search RETAIN tips and the firmware change history for the reference code to determine the recommended
actions. If a firmware update is needed, see Updating the firmware
BA050001
Explanation: Failed to reboot a partition in logical partition mode
Response:
1. Reboot the server.
2. Search RETAIN tips and the firmware change history for the reference code to determine the recommended
actions. If a firmware update is needed, see Updating the firmware
BA040035 • BA050001
204 Power Systems: IBM Flex System p260 and p460 Compute Nodes Installation and Service Guide
To Next Page
Loading...
