IBM Flex System p260 User Manual

BA153002
Explanation: Gigabit Ethernet adapter failure
Response: Verify that the MAC address programmed in the FLASH/EEPROM is correct.
BA153003
Explanation: Gigabit Ethernet adapter failure
Response:
1. Reboot the server.
2. Check for server firmware updates; install the updates if available.
3. Replace the adapter specified by the location code.
4. If the problem persists: Search RETAIN tips and the firmware change history for the reference code to determine
the recommended actions. If a firmware update is needed, see Updating the firmware
BA154010
Explanation: HEA h-call error.
Response:
1. Reboot the server.
2. Check for server firmware updates; install the updates if available.
3. If the problem persists: Search RETAIN tips and the firmware change history for the reference code to determine
the recommended actions. If a firmware update is needed, see Updating the firmware
BA154020
Explanation: The required open firmware property was not found.
Response:
1. Reboot the server.
2. Check for server firmware updates; install the updates if available.
3. If the problem persists: Search RETAIN tips and the firmware change history for the reference code to determine
the recommended actions. If a firmware update is needed, see Updating the firmware
BA154030
Explanation: Invalid parameters were passed to the HEA device driver.
Response:
1. Reboot the server.
2. Check for server firmware updates; install the updates if available.
3. If the problem persists: Search RETAIN tips and the firmware change history for the reference code to determine
the recommended actions. If a firmware update is needed, see Updating the firmware
BA153002 • BA154030
216 Power Systems: IBM Flex System p260 and p460 Compute Nodes Installation and Service Guide

IBM Flex System p260 Specifications

General

Brand	IBM
Model	Flex System p260
Category	Server
Language	English