BA170210
Explanation: Setenv/$Setenv parameter error - name contains a null character
Response:
1. Reboot the server.
2. Check for server firmware updates; install the updates if available.
3. If the problem persists: Search RETAIN tips and the firmware change history for the reference code to determine
the recommended actions. If a firmware update is needed, see Updating the firmware
BA170211
Explanation: Setenv/$Setenv parameter error - value contains a null character
Response:
1. Reboot the server.
2. Check for server firmware updates; install the updates if available.
3. If the problem persists: Search RETAIN tips and the firmware change history for the reference code to determine
the recommended actions. If a firmware update is needed, see Updating the firmware
BA170220
Explanation: Unable to write a variable value to NVRAM due to lack of free memory in NVRAM.
Response:
1. Reduce the number of partitions, if possible, to add more NVRAM memory to this partition.
2. Reboot the server.
3. Search RETAIN tips and the firmware change history for the reference code to determine the recommended
actions. If a firmware update is needed, see Updating the firmware
BA170221
Explanation: Setenv/$setenv had to delete stored firmware network boot settings to free memory in NVRAM.
Response: Enter the adapter and network parameters again for the network boot or network installation.
BA170998
Explanation: NVRAMRC script evaluation error - command line execution error.
Response:
1. Reboot the server.
2. Search RETAIN tips and the firmware change history for the reference code to determine the recommended
actions. If a firmware update is needed, see Updating the firmware
BA170210 • BA170998
Chapter 8. Troubleshooting 219
To Next Page
Loading...
Need help?
General