BA278007
Explanation: Failed to reboot the system after a firmware flash update
Response:
1. Reboot the server.
2. Search RETAIN tips and the firmware change history for the reference code to determine the recommended
actions. If a firmware update is needed, see Updating the firmware
BA278009
Explanation: The operating system's server firmware update management tools are incompatible with this system.
Response: Go to the IBM download site at www14.software.ibm.com/webapp/set2/sas/f/lopdiags/home.html to
download the latest version of the service aids package for Linux.
BA27800A
Explanation: The firmware installation failed due to a hardware error that was reported.
Response:
1. Look for hardware errors in the event log.
2. Resolve any hardware errors that are found.
3. Search RETAIN tips and the firmware change history for the reference code to determine the recommended
actions. If a firmware update is needed, see Updating the firmware
BA280000
Explanation: RTAS discovered an invalid operation that may cause a hardware error
Response:
1. Reboot the server.
2. Check for server firmware updates; install the updates if available.
3. Search RETAIN tips and the firmware change history for the reference code to determine the recommended
actions. If a firmware update is needed, see Updating the firmware
BA290000
Explanation: RTAS discovered an internal stack overflow
Response:
1. Reboot the server.
2. Check for server firmware updates; install the updates if available.
3. Search RETAIN tips and the firmware change history for the reference code to determine the recommended
actions. If a firmware update is needed, see Updating the firmware
BA278007 • BA290000
Chapter 8. Troubleshooting 227
To Next Page
Loading...
Need help?
General