BA340001
Explanation: There was a logical partition event communication failure reading the BladeCenter open fabric
manager parameter data structure from the service processor.
Response:
1. Reboot the server.
2. Check for server firmware updates; install the updates if available.
3. Search RETAIN tips and the firmware change history for the reference code to determine the recommended
actions. If a firmware update is needed, see Updating the firmware
BA340002
Explanation: There was a logical partition event communication failure reading the BladeCenter open fabric
manager location code mapping data from the service processor.
Response:
1. Reboot the server.
2. Check for server firmware updates; install the updates if available.
3. Search RETAIN tips and the firmware change history for the reference code to determine the recommended
actions. If a firmware update is needed, see Updating the firmware
BA340003
Explanation: An internal firmware error occurred; unable to allocate memory for the open fabric manager location
code mapping data.
Response:
1. Reboot the server.
2. Check for server firmware updates; install the updates if available.
3. Search RETAIN tips and the firmware change history for the reference code to determine the recommended
actions. If a firmware update is needed, see Updating the firmware
BA340004
Explanation: An internal firmware error occurred; the open fabric manager parameter data was corrupted.
Response:
1. Reboot the server.
2. Check for server firmware updates; install the updates if available.
3. Search RETAIN tips and the firmware change history for the reference code to determine the recommended
actions. If a firmware update is needed, see Updating the firmware
BA340001 • BA340004
230 Power Systems: IBM Flex System p260 and p460 Compute Nodes Installation and Service Guide
To Next Page
Loading...
