C103A400
Explanation: Special purpose registers are being loaded, and instructions are being started, on the server processors
Response:
1. Search RETAIN tips and the firmware change history for the reference code to determine the recommended
actions. If a firmware update is needed, see Updating the firmware.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
C103A401
Explanation: Instructions have been started on the server processors
Response:
1. Search RETAIN tips and the firmware change history for the reference code to determine the recommended
actions. If a firmware update is needed, see Updating the firmware.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
C1112000
Explanation: Power on: starting Standby-PowerOnTransition transition file (primary)
Response:
1. Search RETAIN tips and the firmware change history for the reference code to determine the recommended
actions. If a firmware update is needed, see Updating the firmware.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
C11120FF
Explanation: Power on: completed Standby-PowerOnTransition transition file (primary)
Response:
1. Search RETAIN tips and the firmware change history for the reference code to determine the recommended
actions. If a firmware update is needed, see Updating the firmware.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
C116C2XX
Explanation: System power interface is listening for power fault events from the system power control network
(SPCN). The last byte (xx) will increment up from 00 to 1F every second while it waits.
Response:
1. Search RETAIN tips and the firmware change history for the reference code to determine the recommended
actions. If a firmware update is needed, see Updating the firmware.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
C103A400 • C116C2XX
Chapter 8. Troubleshooting 249
To Next Page
Loading...
Need help?
General