EasyManua.ls Logo

IBM Flex System p260 - Page 285

IBM Flex System p260
524 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CA00E15B
Explanation: Transfer control to operating system (service mode boot)
Response: Go to Boot problem resolution.
CA00E15F
Explanation: Adapter VPD evaluation
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
CA00E170
Explanation: Start of PCI bus probe
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
CA00E172
Explanation: First pass of PCI device probe
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
CA00E174
Explanation: Establishing host connection
Response:
1. Verify that:
v The bootp server is correctly configured; then, retry the operation.
v The network connections are correct; then, retry the operation.
2. If the problem persists:
a. Go to Checkout procedure.
b. Replace the system-board, as described in Replacing the system-board and chassis assembly.
CA00E15B CA00E174
Chapter 8. Troubleshooting 273

Table of Contents

Related product manuals