IBM Flex System p260 - Page 308

D1311XXX
Explanation: Turn on error log capture into dump
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
D1321XXX
Explanation: Store information about existing core files
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
D1381XXX
Explanation: Invalidate the dump
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
D1391XXX
Explanation: Check for valid dump sequence
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
D13A1XXX
Explanation: Get dump identity sequence
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
D13B1XXX
Explanation: Get dump length sequence
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
D1311XXX • D13B1XXX
296 Power Systems: IBM Flex System p260 and p460 Compute Nodes Installation and Service Guide