IBM Flex System p260 - Page 340

252B-716
Explanation: PCI bus error detected by EEH.
1. Check the BladeCenter management-module event log. If an error was recorded by the system, see POST progress
codes (checkpoints).
2. Replace any parts reported by the diagnostic program.
3. Replace the system-board
Response:
Failing Item:
v FFC_252B
v FFC_293
252B-717
Explanation: PCI bus error detected by adapter.
1. Check the BladeCenter management-module event log. If an error was recorded by the system, see POST progress
codes (checkpoints).
2. Replace any parts reported by the diagnostic program.
3. Replace the system-board
Response:
Failing Item:
v FFC_252B
v FFC_293
252B-718
Explanation: Temporary PCI bus error detected by adapter.
1. Check the BladeCenter management-module event log. If an error was recorded by the system, see POST progress
codes (checkpoints).
2. Replace any parts reported by the diagnostic program.
3. Replace the system-board
Response:
Failing Item:
v FFC_252B
v FFC_293
252B-716 • 252B-718
328 Power Systems: IBM Flex System p260 and p460 Compute Nodes Installation and Service Guide