IBM Flex System p260 - Page 344

2567-XXX
Explanation: USB integrated system-board and chassis assembly. Go to Performing the checkout procedure.
Response:
Failing Item:
v FFC_2567
256D-201
Explanation: Adapter configuration error.
1. Check the BladeCenter management-module event log. If an error was recorded by the system, see POST progress
codes (checkpoints).
2. Replace any parts reported by the diagnostic program.
3. Replace the system-board
Response:
Failing Item:
v FFC_256D
v FFC_221
256D-601
Explanation: Error log analysis indicates adapter.
1. Check the BladeCenter management-module event log. If an error was recorded by the system, see POST progress
codes (checkpoints).
2. Replace any parts reported by the diagnostic program.
3. Replace the system-board
Response:
Failing Item:
v FFC_256D
256D-602
Explanation: Error log analysis indicates an error attention condition.
1. Check the BladeCenter management-module event log. If an error was recorded by the system, see POST progress
codes (checkpoints).
2. Replace any parts reported by the diagnostic program.
3. Replace the system-board
Response:
Failing Item:
v FFC_256D
2567-XXX • 256D-602
332 Power Systems: IBM Flex System p260 and p460 Compute Nodes Installation and Service Guide