IBM Flex System V7000 User Manual

Chapter 3. Systems management 93
򐂰 A window opens, giving a single location to view the IP addresses of various chassis
Components. If you want to view the IP address of a certain component instantly, you can
just scroll the mouse pointer over the View option. This action opens a pop-up window that
shows the IPv4 and IPv6 addresses of that device, as shown in Figure 3-8.
Figure 3-8 Component IP Configuration view
򐂰 To configure the IP address of a certain chassis component, click the component
(under Device Name)
, as shown in Figure 3-9.
Figure 3-9 IP Address Configuration

IBM Flex System V7000 Specifications

General

Form Factor	2U
Model	IBM Flex System V7000
Category	Storage
Power Supply	Dual redundant power supplies
Storage Controller	Dual active-active controllers
RAID Levels	RAID 0, 1, 5, 6, 10
Maximum Drives	240
Expansion Enclosures	Up to 9
Drive Types Supported	SSD, HDD
Host Interface Ports	8 Gbps FC
Scalability	Scalable with expansion enclosures
Operating Temperature	5°C to 40°C
Management Interface	Web-based GUI, CLI, SMI-S