IBM Flex System V7000 User Manual

132 IBM Flex System V7000 Storage Node Introduction and Implementation Guide
Selecting Ethernet Switches in Network Control interface opens a view of all available
Ethernet Switches along with information regarding state, access, IP and type, as shown in
Figure 3-73.
Figure 3-73 Viewing Ethernet Switches in FSM

IBM Flex System V7000 Specifications

General

Form Factor	2U
Model	IBM Flex System V7000
Category	Storage
Power Supply	Dual redundant power supplies
Storage Controller	Dual active-active controllers
RAID Levels	RAID 0, 1, 5, 6, 10
Maximum Drives	240
Expansion Enclosures	Up to 9
Drive Types Supported	SSD, HDD
Host Interface Ports	8 Gbps FC
Scalability	Scalable with expansion enclosures
Operating Temperature	5°C to 40°C
Management Interface	Web-based GUI, CLI, SMI-S