IBM RS/6000 Enterprise Server M80 - Page 258

Table 7. Service Processor Error Codes (continued)
Error Code Description Action/
Possible Failing FRU
406A 0536 Self test detected memory DIMM fault Memory DIMM 24, riser 2
Location: U1.1-P1-M2.24
406A 0537 Self test detected memory DIMM fault Memory DIMM 31, riser 2
Location: U1.1-P1-M2.31
406A 0538 Self test detected memory DIMM fault Memory DIMM 32, riser 2
Location: U1.1-P1-M2.32
406A 053D Self test detected memory DIMM group fault Memory octal D, riser 2
Location: U1.1-P1-M2.7 x8
406A 053E Self test detected memory DIMM group fault Memory quad D odd, riser 2
Location: U1.1-P1-M2.7 x4
406A 053F Self test detected memory DIMM group fault Memory quad D even, riser 2
Location: U1.1-P1-M2.8 x4
406A 05FF Self test detected memory on riser fault Memory failure on riser card 2 that cannot be
automatically isolated. go to “MAP 1540:
Minimum Configuration” on page 110 and run
CEC drawer minimum configuration for
further isolation.
406A 0600 Self test detected CEC RIO bus adapter CEC RIO bus adapter
Location: U1.1-P1.1
406A 0601 Self test detected clock card fault CEC clock card
Location: U1.1-P1.1.1
406A 3101 Self test detected RIO port 0 fault CEC RIO bus adapter
Location: U1.1-P1.1
406A 3102 Self test detected RIO port 1 fault CEC RIO bus adapter
Location: U1.1-P1.1
406A 3103 Self test detected RIO port 2 fault CEC RIO bus adapter
Location: U1.1-P1.1
406A 3104 Self test detected RIO port 3 fault CEC RIO bus adapter
Location: U1.1-P1.1
406A 3121 Self test detected RIO cable on port 0 fault 1. RIO cable on port 0
Location: U1.1-P1.1/Q1
2. CEC RIO bus adapter
Location: U1.1-P1.1
406A 3122 Self test detected RIO cable on port 1 fault 1. RIO cable on port 1
Location: U1.1-P1.1/Q2
2. CEC RIO bus adapter
Location: U1.1-P1.1
406A 3123 Self test detected RIO cable on port 2 fault 1. RIO cable on port 2
Location: U1.1-P1.1/Q3
2. CEC RIO bus adapter
Location: U1.1-P1.1
406A 3124 Self test detected RIO cable on port 3 fault 1. RIO cable on port 3
Location: U1.1-P1.1/Q4
2. CEC RIO bus adapter
Location: U1.1-P1.1
406A 3140 Self test detected RIO hub 0 fault CEC RIO bus adapter
Location: U1.1-P1.1
240 Service Guide