IBM RS/6000 Enterprise Server M80 - Page 259

Table 7. Service Processor Error Codes (continued)
Error Code Description Action/
Possible Failing FRU
406A 3141 Self test detected RIO hub 1 fault CEC RIO bus adapter
Location: U1.1-P1.1
406A 31FF Self test detected RIO port fault CEC RIO bus adapter
Location: U1.1-P1.1
406A 3200 Self test detected primary I/O drawer fault Go to “MAP 1540: Minimum Configuration”
on page 110.
406A 3201 Self test detected primary I/O drawer
backplane fault
Primary I/O drawer backplane
Location: U0.1-P1
406A 3280 Self test detected primary RIO adapter fault Primary RIO adapter
Location: U0.1-P1.1
406A 3281 Self test detected primary RIO port 0 fault 1. Check RIO cable
Location: U0.1-P1.1/Q1
2. RIO bus adapter
Location: U0.1-P1.1
406A 3282 Self test detected primary RIO port 1 fault 1. Check RIO cable
Location: U0.1-P1.1/Q2
2. RIO bus adapter
Location: U0.1-P1.1
406A 3283 Self test detected primary RIO ports fault RIO bus adapter
Location: U0.1-P1.1
406A 3284 Self test detected PCI controller PHB0 1. RIO bus adapter
Location: U0.1-P1.1
2. Primary I/O drawer backplane
Location: U0.1-P1
406A 3285 Self test detected PCI controller PHB1 1. RIO bus adapter
Location: U0.1-P1.1
2. Primary I/O drawer backplane
Location: U0.1-P1
406A 3286 Self test detected PCI controller PHB2 1. RIO bus adapter
Location: U0.1-P1.1
2. Primary I/O drawer backplane
Location: U0.1-P1
406B 0001 Wire test detected CEC backplane failure CEC backplane
Location: U1.1-P1
406B 0003 Wire test detected processor fault All processors
Location: U1.1-P1-C1
406B 0009 Wire test detected memory fault All memory
Location: U1.1-P1-M1 x2
406B 00A0 Wire test detected CSP service processor
firmware fault
Update system firmware
Location: U0.1-P1/Y1
406B 00A1 Wire test detected AIX or system firmware
fault
1. Check for AIX updates
2. Check for system firmware updates
Location: U0.1-P1/Y1
406B 00A2 Wire test detected service processor firmware
(processor runtime diagnostics) fault
Check for system firmware updates
Location: U0.1-P1/Y1
406B 00A3 Wire test detected memory plugging fault All pluggable memory
406B 00A4 Wire test detected application caused fault Application software
Chapter 5. Error Code to FRU Index 241