Reviewing your packing slip
After you open your shipment, you must verify the contents against the packing
slip.
In each box, locate the packing slip. Verify that the items listed in the packing slip
match what is in the box, and that any optional items that you ordered are
included in the list. Your shipment might contain extra items, depending on the
order.
Note: If you purchased your equipment through a reseller, some of the options
might be preinstalled. Contact your supplier for details.
Use the following checklist to check off the items in your order as you verify that
they are included in your shipment.
__ v Control enclosure or expansion enclosure (Table 6):
Table 6. Storwize V3700 enclosures.
Machine
type/model
Feature
code
Part
number Description
2072-12C ACAN 2072L2C IBM Storwize V3700 12-slot Dual Control Enclosure
for 3.5-inch drives (AC power)
2072-12E ACAS 2072LEU IBM Storwize V3700 12-slot Expansion Enclosure for
3.5-inch drives (AC power)
2072-24C ACBN 2072S2C IBM Storwize V3700 24-slot Dual Control Enclosure
for 2.5-inch drives (AC power)
2072-24E ACBS 2072SEU IBM Storwize V3700 24-slot Expansion Enclosure for
2.5-inch drives (AC power)
2072-2DC ACDJ 2072T2C IBM Storwize V3700 24-slot Dual Control Enclosure
for 2.5-inch drives (DC power)
2072-2DE ACDS 2072TEU IBM Storwize V3700 24-slot Expansion Enclosure for
2.5-inch drives (DC power)
Note: Models 2072-2DC and 2072-2DE run in a direct current (DC) power
environment rather than the alternating current (AC) environment that is
required by the other models in the range. The only differences between these
models and the equivalent 24 slot AC power models are the power
requirements and the power supply units that are installed in the enclosure.
For more information about the DC power supply units, see “Direct current
power supply units” on page 10.
__ v Rack-mounting hardware kit:
__ – Two rails (right and left assembly)
__ – Two rail springs
__ – Two sets of rail-mount screws and alternative rail-mount pins (large and
small) for non-IBM racks
__ v Two power cords for connection to rack-mounted power distribution units
__ v Drive bay blanking plates (installed in the enclosure)
__ v Publications package (includes a USB flash drive that is used to initialize the
system)
Chapter 1. Before you begin the installation 5