1. Locate the rack mounting rails and screws (Figure 9). The rail assembly
consists of two rails that must be installed in the rack cabinet.
2. Remove the springs that are taped to one of the rails.
3. Attach a spring to the outside of each rail.
a. Attach the circle end of the spring around the stud on the rail. (See
Figure 10 on page 21.)
b. Pulling on the spring, attach the hook end of the spring to the tab on the
rail.
Figure 9. Rack mounting rails and screws
20 Storwize V3700: Quick Installation Guide
To Next Page
Loading...
