c. Connect the USB flash drive to the Storwize system and allow it to
initialize.
d. Connect the USB flash drive to the computer to check that the initialization
completed.
9. If the system initialization completed successfully, click Finish. If you have a
network connection to the Storwize system, the system management GUI is
displayed. If the computer does not have a network connection to the
Storwize system, go to the computer you will use to manage the system and
start a supported browser. Direct the browser to the management address you
specified for the system.
10. Log in with user name superuser and password passw0rd.
Note: The 0 character in the password is a zero, not the letter O.
11. Follow the on-screen instructions to begin setting up your system.
Note: The other options in the initialization tool are used to reset the service
IP address or the superuser password.
60 Storwize V3700: Quick Installation Guide
To Next Page
Loading...
