EasyManuals Logo
Home>IBM>Server>System x3500

IBM System x3500 Service Guide

IBM System x3500
196 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #118 background imageLoading...
Page #118 background image
v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v See Chapter 3, “Parts listing, System x3500 Type 7977,” on page 41 to determine which components are
customer replaceable units (CRU) and which components are field replaceable units (FRU).
v If an action step is preceded by “(Trained service technician only),” that step must be performed only by a
trained service technician.
Error code Description Action
00012000 Processor machine check error.
1. (Trained service technician only) Reseat the
microprocessor.
2. (Trained service technician only) Remove
microprocessor 2 and restart the server.
v If no error code occurs, microprocessor 2 might
have failed; replace the microprocessor.
v If the error code remains, remove
microprocessor 1 and install microprocessor 2
in the connector for microprocessor 1; then,
restart the server. If no error code occurs,
microprocessor 1 might have failed; replace the
microprocessor.
3. Replace the following components one at a time,
in the order shown, restarting the server each
time:
a. (Trained service technician only)
Microprocessor
b. (Trained service technician only) System
board
00019501 Processor 1 is not functioning; check
processor LEDs.
1. (Trained service technician only) Reseat the
microprocessor 1.
2. (Trained service technician only) Remove
microprocessor 2 and restart the server.
v If no error code occurs, microprocessor 2 might
have failed; replace the microprocessor.
v If the error code remains, remove
microprocessor 1 and install microprocessor 2
in the connector for microprocessor 1; then,
restart the server. If no error code occurs,
microprocessor 1 might have failed; replace the
microprocessor.
3. Replace the following components one at a time,
in the order shown, restarting the server each
time:
a. (Trained service technician only)
Microprocessor 1
b. (Trained service technician only) System
board
108 IBM System x3500 Type 7977: Problem Determination and Service Guide

Table of Contents

Other manuals for IBM System x3500

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the IBM System x3500 and is the answer not in the manual?

IBM System x3500 Specifications

General IconGeneral
BrandIBM
ModelSystem x3500
CategoryServer
LanguageEnglish

Related product manuals