Installing Software for Windows 3.11
7-10 IBM ThinkPad 310E/310ED: User’s Guide
Installing Microsoft Windows 3.11
Windows 3.11 operates in a DOS environment. Install the following
before installing Windows:
• DOS Version 7.0 (see your DOS manuals)
•
CD-ROM Device Driver for DOS (see page 7-7)
• Sleep Manager program for DOS (see page 7-7)
Important!
During installation, do the following for Windows to operate
correctly:
• When the Windows Setup program asks you to select either
Express Setup or Custom Setup, select C for Custom Setup.
• Install Windows Version 3.11 with the default VGA display
driver that came with Windows. After you complete the
installation of Windows, install the ThinkPad display driver.
To install Windows 3.11 with Advanced Power Management (APM):
1 Turn on the computer.
2 Start the installation as specified in the Windows manual.
3 When the Windows Setup program asks you to select Express
Setup or Custom Setup, select C for Custom Setup.
4 Continue installing Windows 3.11 until the following screen
appears.
To Next Page
Loading...
