Entering the BIOS Utility
Appendix C. BIOS Utility C-3
Entering the BIOS Utility
Note:
If the Setup password is set, you
need to enter the Setup password to
gain access to the BIOS Utility.
Press F2 while the ThinkPad logo is being displayed after power-on
to enter the BIOS Utility. When the power-on password is set, press
F2 within three seconds after you input your password and hit the
Enter key to enter the BIOS Utility. The main screen displays.
BIOS Utility
Basic System Settings
System Security
Power Management Settings
Load Setup Default Settings
↑↓=Move highlight bar, ↵=Select, Esc=Exit
There are four main menu items:
• Basic System Settings
• System Security
• Power Management Settings
• Load Setup Default Settings
To Next Page
Need help?
General