PCMSetup For Windows
Appendix B. Advanced Information for PC Cards B-3
PCMSetup For Windows
PCMSetup is a utility that enables you to:
• Configure your computer to optimize its performance.
• Customize the CardAgent software to maximize its functionality.
• Select PC Card options that you did not originally select when
you first installed PCM.
Adding Options
If you want to add support for PC Cards that you originally did not
specify when you first installed PCM, do the following:
1 Click on Options or press Alt-O.
2 Enable the options (described below) that you need by clicking
on the appropriate checkbox.
• Flash. Enable this option if you plan to use flash cards.
• ATA. Enable this option if you plan to use ATA cards.
When the option is enabled, an “X” appears in the box. When
you disable the option, the box is empty.
Specifying a Fax/Modem Communications Port
To specify a communications port for your fax/modem card, do the
following:
1 Double-click on PCMSetup For Windows in the PhoenixCard
Manager program group.
2 Click on Defaults or press Alt-D.
To Next Page
Loading...
Need help?
General