The following is a list of commonly used PS2 commands. The list is
organized as follows:
Description of the command
Power Management Commands
Set whether to enter suspend mode when the LCD is closed:
Set POwer, LCd, DISK, SPeed, and STandby to their original values:
Set the hard disk drive power management timer for the specified number of
minutes (
xx
):
Set the features for the ESS AudioDrive chip:
Parameter1 Parameter2 Parameter3
Cover Enable | Disable —
Note:
This command is effective on the current power management mode set by the
PM command.
DEFAULT — —
Note: This command is effective on the current power management mode set by the
PM commands.
DISK
xx
[AC | DC]
198 IBM ThinkPad 600 Online Book
To Next Page
Loading...
