IBM ThinkPad 600 - Page 206

Set the features for the infrared port (IR):
Create the hibernation file:
Enter hibernation mode when the power switch is pressed:
Set the timer to enter hibernation mode after the specified number of
minutes (
xx ):
AUdio Enable | Disable
ADDress
DMA
IRQ
SBaddress
—
530 | 604 | E80 | F490
0 | 1 | 3
5 | 7 | 10 | 11
220 | 240 | 260 | 280
IR Enable | Disable
ADDress
DMA
—
1 | 2 | 3 | 4
0 | 1 | 3 | Disable
Note: Use this command before using other hibernation commands.
HFILE C – Z | DELete —
Note: Create the hibernation file using the HFILE command before using this
command.
HSWITCH Enable | Disable
HTimer xx [AC | DC]
Appendix B. Using PS2 Commands 199