IBM ThinkPad 600 - Page 207

Set the power management mode to enter when a low-battery condition
occurs:
AC: Specifies battery mode when the AC Adapter is connected.
DC: Specifies ac mode when using battery power:
Set the LCD off when there is no computer operation after the specified
number of minutes (
xx ):
Set the resume timer:
Set the power management mode:
Set the timer to enter suspend mode after the specified number of minutes
(
xx ):
AC: Specifies battery mode when the AC Adapter is connected.
DC: Specifies ac mode when using battery power.
Note:
Create the hibernation file using the HFILE command before using the LB H
command.
LBattery Suspend | Hibernation —
Note: This command is effective on the current power management mode set by the
PM command.
LCd xx [AC | DC]
Note: yyyy can be set from 1995 to 2093.
ON at [yyyy/MM/DD] HH:MM:SS
| Clear
—
PMode High | Auto | Custom [AC | DC]
200 IBM ThinkPad 600 Online Book