IBM ThinkPad 600 - Page 209

Set the timer to enter hibernation mode from suspend mode after the
specified number of minutes:
Set the power management mode to enter by the automatic power-saving
timer:
Set the CD-ROM speed
Display Commands
Set the screen expansion:
Set where to display information:
Parameter1 Parameter2 Parameter3
S2H 30 | 60 | 90 | Disable —
Note: Create the hibernation file using the HFILE command before using the TI H
command.
TImer Suspend | Hibernation —
Note: The default is Normal.
CDSPeed High | Normal | Silent —
HVEXPansion ON | OFf —
SCreen LCD | CRT | BOTH —
202 IBM ThinkPad 600 Online Book