10. Remove the 2 round-head screws 10 on each rear bracket that are securing the rear of the library to the rack (Figure 3).
Figure 3. Removing screws at the rear of the library
11. Remove the large black screws 11 from each front bracket that is securing the front of the library to the rack, and slide the library chassis out of the rack (Figure 4).
Figure 4. Removing screws at the front of the library
12. Remove the flat-head screws 8 to remove the left 3 and right 4 front brackets from the front of the library chassis (Figure 5).
Figure 5. Removing the front brackets from the library chassis
Installing the library on a desktop
For details on the deskside kit components, see Installing on a tabletop.
1. Attach the left 5 and right 3 rails to the chassis with 3 flat-head screws 6 on each side (Figure 6).
Figure 6. Attaching the side rails to the library chassis
To Next Page
Loading...
