• Enabling and disabling security, creating a password, and setting a timeout
for the operator panel (performed by administrator) see: Enabling or disabling
security for the operator panel (performed by administrator)
2
• Tape Library Specialist Web interface:
• Enabling or disabling password protection for Web screens (performed by
administrator)
2
• Enabling or disabling the Storage Authentication Service
2
• Establishing the administrator's Web password (performed by administrator)
1
• Adding a Web user account (performed by administrator)
2
• Modifying a Web user account
2
• Changing your Web password (performed by Web user)
2
• Deleting a Web user account (performed by administrator)
2
• Viewing Web users with active sessions (performed by administrator)
2
SMI-S:
• Enabling and disabling the SMI-S agent
2
SNMP:
• Enabling or disabling SNMP authentication trap settings
2
• Enabling or disabling Simple Network Management Protocol (SNMP) traps
2
• Setting the version of SNMP traps
2
• Sending a test SNMP trap
2
• Viewing or changing the SNMP trap community name
2
• Viewing or changing the SNMP request community name
2
• Viewing or changing SNMP system data
2
• Viewing or changing the Simple Network Management Protocol (SNMP) destination IP
configuration and remote port
2
SSL: