IBM TS4300 - Page 232

5. Turn the supply reel (4) clockwise, allowing the moistened tape to adhere to the hub as it winds
around the supply reel (inside the cartridge).
Figure 115. Rewinding tape into cartridge
1 Loader motor worm gear 3 Takeup reel motor
2 Outer guide rail (WARNING: Do
Not Touch)
4 Supply reel motor
6. Continue spooling into the cartridge until the tape is taut and remains within the flanges of the tape
guiding rollers. Turn the supply reel (4) 10 more turns. Ensure that you do not stretch the tape.
7. Go to “Ending procedure” on page 220.
IBM Condential
204IBM TS4300 Tape Library 机器类型 3555： 用户指南