Results
If you are instructed to return the PCI riser-card bracket, follow all packaging
instructions, and use any packaging materials for shipping that are supplied to
you.
Replacing the PCI riser-card bracket to the riser card
Use this information to replace the PCI riser-card bracket to the riser card.
About this task
Note: PCI riser-card brackets must be installed even if you do not install a riser
card.
To install the PCI riser-card bracket to the riser card, complete the following steps:
Procedure
1. Read the safety information that begins on “Safety” on page vii and
“Installation guidelines” on page 33.
2. Turn off the server and peripheral devices and disconnect all power cords.
3. Remove the cover (see “Removing the cover” on page 36).
4. Align the holes on the PCI riser card and the riser-card bracket and install the
screws that attach the PCI riser card to the riser-card bracket.
Figure 144. PCI riser-card bracket removal
Chapter 6. Removing and replacing components 247
To Next Page
Loading...
Need help?
General