IBM x3550 M4 Type 7914 - Page 398

4000006e-00000000 Alert Configuration Global Event Notification set by user [arg1]: RetryLimit=[arg2],
RetryInterval=[arg3], EntryInterval=[arg4].
Explanation: A user changes the Global Event Notification settings.
May also be shown as 4000006e00000000 or 0x4000006e00000000
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0110
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is required.
4000006f-00000000 Alert Recipient Number [arg1] updated: Name=[arg2], DeliveryMethod=[arg3],
Address=[arg4], IncludeLog=[arg5], Enabled=[arg6], EnabledAlerts=[arg7], AllowedFilters=[arg8].
Explanation: A user adds or updates an Alert Recipient
May also be shown as 4000006f00000000 or 0x4000006f00000000
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0111
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is required.
40000070-00000000 SNMP Traps enabled by user [arg1]: EnabledAlerts=[arg2], AllowedFilters=[arg3] .
Explanation: A user enabled the SNMP Traps configuration
May also be shown as 4000007000000000 or 0x4000007000000000
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0112
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is required.
4000006e-00000000 • 40000070-00000000
380
IBM System x3550 M4 Type 7914: Installation and Service Guide