EasyManua.ls Logo

IBM x3550 M4 Type 7914 - Page 605

IBM x3550 M4 Type 7914
868 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
816f000f-2201ffff The System [ComputerSystemElementName] has detected a POST Error deassertion. (ABR
Status)
Explanation: This message is for the use case when an implementation has detected that Post Error has deasserted.
May also be shown as 816f000f2201ffff or 0x816f000f2201ffff
Severity: Info
Alert Category: Critical - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0185
SNMP Trap ID: 50
Automatically notify Support: No
User response: No action; information only. Firmware Error : Sys Boot Status :
816f0013-1701ffff System [ComputerSystemElementName] has recovered from a diagnostic interrupt. (NMI State)
Explanation: This message is for the use case when an implementation has detected a recovery from a Front Panel
NMI / Diagnostic Interrupt
May also be shown as 816f00131701ffff or 0x816f00131701ffff
Severity: Info
Alert Category: Critical - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0223
SNMP Trap ID: 50
Automatically notify Support: No
User response: No action; information only.
816f0021-2201ffff Fault condition removed on slot [PhysicalConnectorElementName] on system
[ComputerSystemElementName]. (No Op ROM Space)
Explanation: This message is for the use case when an implementation has detected a Fault condition in a slot has
been removed.
May also be shown as 816f00212201ffff or 0x816f00212201ffff
Severity: Info
Alert Category: Critical - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0331
SNMP Trap ID: 50
Automatically notify Support: No
User response: No action; information only.
816f000f-2201ffff 816f0021-2201ffff
Appendix A. Integrated management module II (IMM2) error messages 587

Table of Contents

Related product manuals