EasyManua.ls Logo

IBM x3550 M4 Type 7914 - Page 619

IBM x3550 M4 Type 7914
868 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
816f010d-0406ffff The Drive [StorageVolumeElementName] has been enabled. (Drive 6)
Explanation: This message is for the use case when an implementation has detected a Drive was Enabled.
May also be shown as 816f010d0406ffff or 0x816f010d0406ffff
Severity: Info
Alert Category: Critical - Hard Disk drive
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0167
SNMP Trap ID: 5
Automatically notify Support: No
User response: No action; information only.
816f010d-0407ffff The Drive [StorageVolumeElementName] has been enabled. (Drive 7)
Explanation: This message is for the use case when an implementation has detected a Drive was Enabled.
May also be shown as 816f010d0407ffff or 0x816f010d0407ffff
Severity: Info
Alert Category: Critical - Hard Disk drive
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0167
SNMP Trap ID: 5
Automatically notify Support: No
User response: No action; information only.
816f010f-2201ffff The System [ComputerSystemElementName] has recovered from a firmware hang. (Firmware
Error)
Explanation: This message is for the use case when an implementation has recovered from a System Firmware
Hang.
May also be shown as 816f010f2201ffff or 0x816f010f2201ffff
Severity: Info
Alert Category: Critical - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0187
SNMP Trap ID: 50
Automatically notify Support: No
User response: No action; information only.
816f010d-0406ffff 816f010f-2201ffff
Appendix A. Integrated management module II (IMM2) error messages 601

Table of Contents

Related product manuals