IBM x3550 M4 Type 7914

816f0a0c-2014ffff An Over-Temperature Condition has been removed on the [PhysicalMemoryElementName] on
Subsystem [MemoryElementName]. (DIMM 20)
Explanation: This message is for the use case when an implementation has detected an Over Temperature Condition
for Memory that has been Removed.
May also be shown as 816f0a0c2014ffff or 0x816f0a0c2014ffff
Severity: Info
Alert Category: Critical - Temperature
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0147
SNMP Trap ID: 0
Automatically notify Support: No
User response: No action; information only.
816f0a0c-2015ffff An Over-Temperature Condition has been removed on the [PhysicalMemoryElementName] on
Subsystem [MemoryElementName]. (DIMM 21)
Explanation: This message is for the use case when an implementation has detected an Over Temperature Condition
for Memory that has been Removed.
May also be shown as 816f0a0c2015ffff or 0x816f0a0c2015ffff
Severity: Info
Alert Category: Critical - Temperature
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0147
SNMP Trap ID: 0
Automatically notify Support: No
User response: No action; information only.
816f0a0c-2016ffff An Over-Temperature Condition has been removed on the [PhysicalMemoryElementName] on
Subsystem [MemoryElementName]. (DIMM 22)
Explanation: This message is for the use case when an implementation has detected an Over Temperature Condition
for Memory that has been Removed.
May also be shown as 816f0a0c2016ffff or 0x816f0a0c2016ffff
Severity: Info
Alert Category: Critical - Temperature
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0147
SNMP Trap ID: 0
Automatically notify Support: No
User response: No action; information only.
816f0a0c-2014ffff • 816f0a0c-2016ffff
670
IBM System x3550 M4 Type 7914: Installation and Service Guide