Icom GM600 - Page 49

43
8
DSC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
u Select “Manual Input,” then push
[ENT].
+
Push
Rotate
The Distress Call Log is displayed
after receiving the Distress call.
DO NOT select an ID for DROBOSE.
i Enter the 9 digit Distress ID (MMSI
ID) code of the ship in distress that
you wish to help.
+
Rotate
Push
If you do not know the Distress ID, you
can skip step i, and go to step !0.
o After entering, select “Finish,” and
then push [ENT].
!0 Select “Nature of Distress,” then
push [ENT].
!1 Select the desired option, then push
[ENT].
(Example: Fire, Explosion)
+
Push
Rotate
Options:
Undesignated, Fire, Explosion, Flooding,
Collision, Grounding, Capsizing, Sinking,
Adrift, Abandoning Ship, Piracy,
Man Overboard, and EPIRB Emission.
• The transceiver holds this setting for 30
seconds.
!2 Select “Position,” then push [ENT].
+
Push
Rotate
• The position entry screen is displayed.
• Your position and time are displayed.
!3 Enter the position and time data of
the ship in distress.
• See page 31 for entering details.
!4 After entering, select “Finish,” and
then push [ENT].