Icom GM600 - Page 51

45
8
DSC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
To transmit the distress relay call
with “Distress Call Log”:
You can relay a Distress call after
receiving it.
Your ship
Coast
Station
Distress Relay Transmission
Ship in Distress
Distress Transmission
q Push [ Compose DROBOSE]
to display the Compose DROBOSE
screen.
• To display the screen from the Menu
screen:
([MENU] > Compose DROBOSE )
w Select “Message Type,” then push
[ENT].
e Select the desired message type.
(Example: Individual)
+
Push
Rotate
When you select “All Ships” in step e,
“Address” is not displayed in step r.
In that case, go to step y.
r Select “Address,” then push [ENT].
t Select the desired coast station
address or “Manual Input,” then push
[ENT].
(Example: STATION1)
+
Push
Rotate
When you select “Manual Input” in step
t, push the keypad to manually enter
the desired Individual ID. (p. 29)
y Select “Distress ID,” then push [ENT].
u Select the required Distress ID from
the Call log list, then push [ENT].
+
Push
Rotate
Distress Call Log is displayed after
receiving the Distress Call.