6
53
FUNCTIONS FOR TRANSMIT
■ VOX function
The VOX (Voice-Operated Transmission) function
uses your voice to switch between transmit and
receive. This function provides an opportunity for
hands-free operation or to input log entries into your
computer, etc., while operating.
q Push
MODE
to select a phone mode (SSB or
AM).
• When SSB mode is selected, push and hold
MODE
for 1 sec. to toggle between USB and LSB modes.
w Push
VOX
to toggle the VOX function ON and
OFF.
• “ ” appears when the VOX function is ON.
The VOX gain, ANTI-VOX and VOX delay can be set
in VOX set mode. (See below.)
D Adjusting the VOX function
q Push
MODE
to select a phone mode (SSB or
AM).
• When SSB mode is selected, push and hold
MODE
for 1 sec. to toggle between USB and LSB modes.
w Push
VOX
to toggle the VOX function ON and
OFF.
• “ ” appears when the VOX function is ON.
e
Adjust the VOX functions in the VOX set mode.
q Push and hold
VOX
for 1 sec. to enter the VOX
set mode.
w Rotate [M-CH] to select “VoX GAIN.”
e While speaking into the microphone with your
normal voice level, rotate [DIAL] to the point
where the transceiver is continuously transmit-
ting.
r Rotate [M-CH] to select “ANTI-Vox.”
t During receive, rotate [DIAL] to adjust the anti-
VOX gain to the point where the transceiver
does not switch to transmit due to received
audio from the speaker.
y Rotate [M-CH] to select “VoX DELY.”
u Rotate [DIAL] to adjust the VOX delay for a
convenient interval before returning to receive.
i Push
VOX
to exit the VOX set mode. and return
to normal operation.
To Next Page
Loading...
