91
14
CONTROL COMMAND
D Band stacking register
To send or read the desired band stacking register’s
contents, a combination of the frequency band and the
register codes (“01” is fixed as the register code) as fol-
lows are used.
For example, when sending/reading the contents in
the 21 MHz band, the code “0701” is used.
• Frequency band codes
CODE BAND FREQUENCY RANGE
01 1.8 MHz 1.800000 – 1.999999
02 3.5 MHz 3.400000 – 4.099999
03 7 MHz 6.900000 – 7.499999
04 10 MHz 9.900000 – 10.499999
05 14 MHz 13.900000 – 14.499999
06 18 MHz 17.900000 – 18.499999
07 21 MHz 20.900000 – 21.499999
08 24 MHz 24.400000 – 25.099999
09 28 MHz 28.000000 – 29.999999
10 50 MHz 50.000000 – 54.000000
11 General Other than above
D Data mode with filter width setting
The following data sequence is used when sending or
reading the data mode with filter width setting.
To Next Page
Loading...
