Icom IC-7610

12
OPTIONS
12-1
Options
IC-PW1/IC-PW1EURO
linear amplifier
HF/50 MHz all band 1 kW linear amplifi er including an
automatic antenna tuner. An optional OPC-599
adapter
cable
is required for the connection.
SM-50
deSKtop microphone
Dynamic microphone with
[UP]/[DOWN] switches.
HM-219
microphone
SM-30
deSKtop microphone
Desktop microphone
with a low frequency cut
function.
PS-126
dc power SupplY
• Output voltage: 13.8 V DC
• Maximum output current:
25 A
SP-23
eXternal SpeaKer
External speaker with high
and low frequency cut
functions. (2 W/8 Ω)
RC-28
remote encoder
For operating the
RS-BA1 (version 1.3
or later) or using as a
sub dial to operate the
transceiver.
SP-34
eXternal SpeaKer
External speaker with high
and low frequency cut
functions. (3 W/8 Ω)
AH-2b
antenna element
A 2.5 m (8.2 ft)
long antenna
element for mobile
operation with the
AH-4.
AH-4
antenna tuner
Automatic antenna tuner
to tune a long wire or
whip antenna for base,
portable, or mobile
HF/50 MHz operation.
AH-740
automatic
tuning antenna
High performance,
automatic high-speed
tuning antenna.
The optional AH-5NV
nViS Kit
is available.
• AH-5NV
nViS Kit
Use with the AH-740.
• AH-710
folded dipole antenna
Covers 2 to 30 MHz wide frequency range.
Element length: 24.5 m (80.4 ft)
Coaxial cable (supplied): 30 m (98.4 ft)
• MB-121
carrYing handle
• OPC-420
control cable
A 10 m (32.8 ft) shielded control cable for the AH-4.
• RS-BA1
ip remote control Software
NOTE: To remotely control transceivers using the
RS-BA1, BE SURE to comply with your local regulations.
• SP-33
eXternal SpeaKer
Designed for base station operation.
transceiver.