8-6
BASIC MANUAL
8
SET MODE
My Station
»
SET > My Station
My Call Sign (DV)
The transceiver has a total of 6 memories to save
your own call signs for use in the DV mode. You can
enter a call sign of up to 8 digits. Also, a note of up to
4 characters, for operating transceiver type, area, and
so on, can be entered.
TX Message (DV)
The transceiver has a total of 5 memories to save
short messages for simultaneous transmission in the
DV mode.
Enter a message of up to 20 alphanumeric characters
for each memory.
L
My Call Sign (DD)
The transceiver has a total of 6 memories to save
your own call signs for use in the DD mode. You can
enter a call sign of up to 8 digits. Also, a note of up to
4 characters, for operating transceiver type, area, and
so on, can be entered.
»
Front Key Customize
[VOX/BK-IN] (Default: VOX/BK-IN)
[AUTOTUNE/RX>CS/AFC]
The function assignments for the
/ and
/ keys on the front panel can be changed.
L See page 8-7 about the functions.
»
Remote MIC Key
[A] (Default: Home CH)
[B]
[]
[]
keys on the HM-243 speaker microphone can be changed.
L See page 8-8 about the functions.
Mode Select
(Default:
✔
SSB/
✔
CW/
✔
RTTY/
✔
AM/
✔
✔
DV/
✔
DD/
✔
ATV)
Selects whether or not to enable to select the mode
by pushing the microphone’s key that “MODE” is
assigned to.
L Displays “✓” when the mode is selectable.
»
SET > Function
Keyboard Type
Full Keyboard Layout (Default: English)
Sets the on-screen keyboard layout to English,
Screen Capture [POWER] Switch
Assigns the Screen Capture function to
.
•
does not act as the Screen Capture key.
• ON: acts as the Screen Capture key.
L When both “Screen Capture [POWER] Switch” and
“Screen Capture.”
Screen Capture File Type (Default: PNG)
PNG or BMP.
REF Adjust
Adjusts the internal reference frequency.
L
cannot manually adjust the internal reference frequency.
To manually adjust, touch [Cancel Sync] to cancel the
To Next Page
Loading...
