EasyManua.ls Logo

Icom IC-905 - Programmed scan and Fine Programmed scan

Icom IC-905
96 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8-7
BASIC MANUAL
SET MODE
8
8
The assignable key functions for Front Key
[VOX/BK-IN]
Function Description
TRANSMIT
Push to toggle between transmit and receive.
VOX/BK-IN*
Push to turn the VOX function in the Voice
operation modes and the Break-in function

P.AMP/ATT
In the 144, 430, or 1200 MHz band


Hold down for 1 second to turn the

NOTCH*
Push to turn the Notch function ON or

NB*

NR*
Push to turn the Noise Reduction function

SPLIT

Hold down for 1 second to turn ON the
Quick Split function.
A/B

Hold down for 1 second to set the

that is not displayed.


Memory mode.
Hold down for 1 second to copy the

CD Push to open the received call history.
PRESET Push to open the PRESET screen.
Home CH
Push to directly select the Home Channel

Memory) or DR screen.
LWhile in the Call channel mode, or when no
Home CH is set, an error beep sounds.
Temporary
Skip
Push to set the frequency to be skipped
while scanning. The selected frequencies
are temporarily skipped for faster scanning.
Voice/Keyer/
RTTY Memory 1
In the SSB, AM, FM, DV, or ATV mode
Push to transmit the voice audio
recorded on the SD card once.
Hold down for 1 second to repeatedly
transmit the voice audio.
LThis key function can also be used on the DR
screen.
LIf the voice audio is not saved in the Voice TX
memory (T1 ~ T4), this function is disabled.
In the CW mode
Push to transmit the Keyer memory
content once.
Hold down for 1 second to repeatedly
transmit the memory content.
LIf the Keyer memory content (M1 ~ M4) is not
entered, this function is disabled.
In the RTTY mode
Push to transmit the RTTY memory
content once.
LIf the RTTY memory content (RT1 ~ RT4) is
not entered, this function is disabled.
Voice/Keyer/
RTTY Memory 2
Voice/Keyer/
RTTY Memory 3
Voice/Keyer/
RTTY Memory 4
[AUTOTUNE/RX>CS/AFC]
Function Description
AUTOTUNE/

In the CW mode
Push to automatically tune the operating
frequency to a close-by CW signal.
In the FM or DV mode


In the DV or DD mode
Hold down for 1 second to display the RX
History list.
CD/RX>CS
Push to open the received call history.
In the DV or DD mode, hold down for 1
second to display the RX History list.
PRESET/
RX>CS
Push to open the PRESET screen.
In the DV or DD mode, hold down for 1
second to display the RX History list.
Home CH/
RX>CS
Push to directly select the Home
Channel that is set to the selected

LWhile in the Call channel mode, or when
no Home CH is set, an error beep sounds.
In the DV or DD mode, hold down for 1
second to display the RX History list.
Temporary
Skip/RX>CS
Push to set the frequency to be
skipped while scanning. The selected
frequencies are temporarily skipped for
faster scanning.
In the DV or DD mode, hold down for 1
second to display the RX History list.
* Hold down for 1 second to open its function menu.

Table of Contents

Other manuals for Icom IC-905

Related product manuals