15
4
MEMORY OPERATION
■ Memory names
The memory channel can display an 8 character name in-
stead of the entered frequency.
D Entering memory names
q Set the desired frequency in the frequency mode. (p. 8)
w Enter the select memory write mode.
• For the IC-A14, push [FUNC] then push [MW](MR).
• For the IC-A14S, hold down [MR] for 1 second.
e Select the desired memory channel to be entered by
pushing [Y]/[Z]
(or on only the IC-A14, push the keys on the
keypad then [ENT]).
r Push [MR] momentarily to enter the memory name entry
mode.
• “-- -- -- -- -- -- -- --” appears and 1st digits blink.
• Available characters
For the IC-A14
t Push the appropriate digit key several times to select the
desired character, as shown to the left.
• To move the cursor forwards or backwards, use [Y]/[Z].
• The cursor automatically moves forward when a different key is
pushed.
• To erase a character, overwrite with a space (displayed as
“_”).
y Push [ENT] to enter the name and frequency at the same
time.
• Return to the frequency display.
• If no name is entered, the entered frequency is displayed.
• To clear the entered memory names, push [CLR] before push-
ing [ENT].
For the IC-A14S
t
Push [Y]/[Z] several times to select the desired character.
• To move the cursor forwards, push [MR].
• To erase a character, overwrite with a space (displayed as
“_”).
y Hold down [MR] for 1 second to enter the name and fre-
quency at the same time.
• Return to the frequency display.
• If no name is entered, the entered frequency is displayed.
• To clear the entered memory names, push [CLR] before hold-
ing down [MR] for 1 second.
KEY CHARACTER KEY CHARACTER
[1] 1, Q, Z [6] 6, M, N, O,
[2] 2, A, B, C [7] 7, P, R, S
[3] 3, D, E, F [8] 8, T, U, V
[4] 4, G, H, I [9] 9, W, X, Y
[5] 5, J, K, L [0] 0, _ (space), –
To Next Page
Loading...
Need help?
General
