25
6
OTHER FUNCTIONS
■ Set mode setting
The Set mode is used to enter infrequently changed function
items or options.
D Entering the Set mode
q Rotate [VOL] to turn the
transceiver power OFF.
w While holding down [Y]
and [Z], rotate [VOL] to
turn ON power and enter
the Set mode.
e Push [MR] several times
to select the desired Set
mode item.
r Push [Y]/ [Z] to select the
desired option or value for
the item.
t Push [CLR] to return to the
frequency mode.
For the IC-A14 only
Push [FUNC], then hold down [SET] (ENT) for 1 second to
also enter the Set mode.
For your information:
The default value of the Set mode items can be changed
with the optional CS-A14 cloning software. The default
settings are recalled by the Home function.
D Set mode items
• ANL— ANL function (selectable in only the IC-A14S)
Turns the ANL
(Automatic Noise Limiter) function ON or OFF.
The ANL reduces received noise components such as those
caused by engine ignition systems.
•
BEEP— Key touch beep (selectable in only the IC-A14S)
The beep tone sounds when you push a switch.
• MIC— Microphone gain
The internal microphone gain can be set to suit your needs.
“H” (High gain), “M” (Medium gain) and “L” (Low gain) can
be selected.
[MR]
[Z]
[CLR
[Y]
To Next Page
Loading...
Need help?
General
