33
7
BATTERY PACKS AND CASE
D Battery case attachment
Slide the battery case in the direction of the arrow.
• Slide the battery case until the transceiver’s battery release button
makes a ‘click’ sound.
To release the battery case:
Slide out the battery case’s battery release button in the di-
rection of the arrow (q), and then push the release button
in the direction of the arrow (w) as shown in the illustration
below. The battery pack is then released.
q
w
NEVER release or attach the battery case when the trans-
ceiver is wet or soiled. This may result water or dust get-
ting into the transceiver/battery case and may result in the
transceiver being damaged.
To Next Page
Loading...
