Icom IC-A14 - Key Touch Beep Tone; ANL Function

22
6
OTHER FUNCTIONS
■ Key touch beep tone
The beep tone, which sounds at the push of a switch can be
set, if desired.
For the IC-A14
➥ Push [FUNC], then push [BEEP](8) to turn the key touch
beep tone ON or OFF.
• The Key touch beep setting is briefly displayed.
For the IC-A14S
q Rotate [VOL] to turn the transceiver power OFF.
w While holding down [Y]/[Z], rotate [VOL] to enter the set
mode.
e Push [MR] several times to select the key touch beep
item, “BEEP.”
r Push [Y]/[Z] to select either ON or OFF.
t Push [CLR] to return to the frequency mode.
■ ANL function
The ANL (Automatic Noise Limiter) function reduces noise
components on received signals, such as those caused by
engine ignition systems.
For the IC-A14
➥ Push [FUNC], then push [ANL](1) to turn the ANL
function ON or OFF.
• The “ANL” icon appears when the ANL function is ON.
For the IC-A14S
q Rotate [VOL] to turn the transceiver power OFF.
w While holding down [Y]/[Z], rotate [VOL] to enter the Set
mode.
e Push [MR] several times to select the ANL item, “ANL.”
r Push [Y]/[Z] to select either ON or OFF.
• The “ANL” icon appears when the ANL function is ON.
t Push [CLR] to return to the frequency mode.
The “ANL” indicator appears when the
ANL function is ON.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19