Icom IC-M801E

47
11
SET MODE
11
DSC data out
This item selects the DSC and DSE data output to the
connected external unit, such as PC, plotter, to [RE-
MOTE] when receiving a DSC call.
• OFF : No data is output even when a DSC call
is received. (default)
• ADDRESS ID
: DSC and DSE data is output when the
DSC call includes the set MMSI or group
code is received,
• ALL : DSC and DSE data is output when a
DSC call is received, even the call for
other stations.
*** SET MODE ***
OFF
ADDRESS
ID
ALL
ÇÇ
ITEM SEL
IC-M801E_0.qxd 05.12.2 16:32 Page 47