EasyManua.ls Logo

Icom IC-R6 - Memory Programming

Icom IC-R6
96 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
IV
QUICK REFERENCE GUIDE
New2001
Your first scanning experience (continued)
5. Receive mode selection
Push [MODE] repeatedly to
select a desired receive mode.
The FM, WFM or AM is selectable.
Memory programming
The IC-R6 has 1300 memory channels for storing often used
receive frequency, mode, etc.
1. Setting frequency
In the VFO mode, set a desired receive frequency and
receive mode.
When the icon is displayed, push [V/M] to select the VFO
mode.
2. Selecting a memory channel
Ho l d dow n [ S . M W] ( V /M) for
1 second, then rotate [DIAL] to
select a desired memory channel.
The icon and memory chan-
nel number blink.
3. Writing a memory channel
Hold down [S.MW](V/M) for 1 second until 3 beeps sound.
The memory channel number automatically increases if you con-
tinue to hold down [S.MW](V/M) after programming.
[DIAL]

Table of Contents

Other manuals for Icom IC-R6

Related product manuals