Icom IC-R6 - Memory Bank Selection

21
5
MEMORY CHANNELS
New2001
■ Memory bank selection
q Push [V/M] to select the memory mode.
w While holding down [BAND], rotate [DIAL] to select a
desired bank.
• The bank can also be selected by pushing [BAND] repeatedly.
• Only banks with entries are displayed.
[DIAL]
Auto write channels
Regular memory
channels
Only banks with
entries are displayed
e Rotate [DIAL] to select the bank channel.
• Only programmed channels are displayed.
[DIAL]
Bank initial
Bank channel number
r To return to a regular memory channel, while holding
down [BAND] then rotate [DIAL], or repeatedly push
[BAND].